The regularisation length (\ell) controls the width of the diffusive crack zone ((\approx 3\ell)). When (\ell\to0), (\Pi) (\Gamma)-converges to the classical Griffith functional. Stationarity of (\Pi) with respect to admissible variations (\delta\mathbfu) and (\delta\phi) yields the coupled Euler‑Lagrange equations :

[ \psi^+(\boldsymbol\varepsilon) ;\rightarrow; H(\mathbfx) . \tag4 ] 3.1. Finite‑Element Discretisation Both fields are approximated using quadratic Lagrange shape functions on an unstructured triangular mesh:

The phase‑field approach was first introduced by Francfort & Marigo (1998) and later regularised by Bourdin, Francfort & Marigo (2000). Since then, a plethora of works (Miehe et al., 2010; Borden et al., 2012; Wu, 2018) have demonstrated its versatility for quasi‑static, dynamic, and fatigue fracture. However, practical adoption still requires a that guides the user from model formulation to implementation, parameter calibration, and verification.

: Phase‑field fracture, 2‑D crack propagation, brittle fracture, finite‑element method, variational formulation, adaptive mesh refinement. 1. Introduction Fracture in brittle materials is traditionally modelled by linear‑elastic fracture mechanics (LEFM) , which relies on singular stress fields and explicit tracking of crack fronts. While LEFM provides elegant analytical solutions for simple geometries, it becomes cumbersome for complex crack nucleation, branching, or interaction. Over the past two decades, phase‑field models of fracture have emerged as a powerful alternative because they regularise the sharp crack interface by a diffuse scalar field, thereby avoiding explicit geometry handling and naturally satisfying the Griffith criterion.

[ \mathbfu^h(\mathbfx) = \sum_i=1^N_n \mathbfN_i(\mathbfx) , \mathbfu i, \qquad \phi^h(\mathbfx) = \sum i=1^N_n N_i(\mathbfx) , \phi_i, \tag5 ]

Corresponding author : first.author@univa.edu A robust computational framework for simulating quasi‑static fracture in brittle solids is presented. The model couples linear elasticity with a regularized phase‑field description of cracks, yielding a fully variational formulation that naturally captures crack nucleation, branching, and interaction without explicit tracking of the crack surface. The governing equations are derived from the minimisation of the total free energy, leading to a coupled system of a displacement‑balance equation and a diffusion‑type phase‑field evolution equation. An adaptive finite‑element discretisation with a staggered solution scheme is implemented in 2‑D. Benchmark problems—including the single‑edge notched tension test, the double‑cantilever beam, and a complex multi‑crack interaction case—demonstrate excellent agreement with analytical solutions and experimental data. Sensitivity analyses reveal the influence of the regularisation length, fracture energy, and load‑control strategies on crack paths. The presented workflow constitutes a “working model” that can be readily extended to anisotropic, heterogeneous, or dynamic fracture problems.