S3600i Flash Loader 7.0.4 Sgh 05 V1.4 For Product.50 Zbijanyt «REAL»

Hi all,

I'm using ST's CubeMX implementation on a F4 discovery board. I use ST's USB middlewares with FreeRTOS.

When I get a special OutputReport from PC side I have to answer nearly immediately (in 10-15 ms). Currently I cannot achieve this timing and it seems my high priority tasks can interrupt the USB callback. What do you think, is it possible? Because it's generated code I'm not sure but can I increase the priority of the USB interrupt (if there is any)?

Thank you, David

10 to 15 ms is very slow, so I'm sure its possible.

Where is the USB callback function called from? If it is an interrupt then it cannot be interrupted by high priority RTOS tasks. Any non interrupt code (whether you are using an RTOS or not) can only run if no interrupts are running.

Without knowing the control flow in your application its hard to know what to suggest. How is the OutputReport communicated to you? By an interrupt, a message from another task, or some other way?

The callback which receive the data from PC is called from the OTGFSIRQHandler (it's the part of the HALPCDIRQHandler function). I think the problem is SysTickHandler's priority is higher than OTGFSIRQHandler and it's cannot be modified, but the scheduler shouldn't interrupt the OTGFSIRQHandler with any task handled by the scheduler. Am I wrong that the scheduler can interrupt the OTGFS_IRQHandler?

In the early era of feature phones, few names were as synonymous with reliable hardware as Samsung’s “SGH” series. Among these devices, the Samsung S3600i (often labeled for specific carriers or regions as "Product .50") remains a notable example of a compact, durable flip phone.

If you possess this file labeled with understand that you are likely holding a community-patched tool designed to force-write firmware onto dying or locked NAND chips. Use it only as a last resort, and never on a phone you are not willing to permanently lose.

Flashing mobile phones with unofficial or modified loaders voids warranties (long expired here), risks hardware damage, and may violate local telecommunications laws. This article is for educational archival purposes only.

However, maintaining or repairing these devices today often requires specialized legacy software. One such tool that appears in vintage firmware archives is .

This article breaks down what this software is, its key components, and the meaning of the cryptic version string: "zbijanyt." The "Flash Loader" is not a driver or a user application. It is a low-level communication protocol and PC-side client used to write raw firmware (also known as "ROM" or "binary") directly onto the phone’s flash memory chip.

Thank you for the answer, I think I'm a bit confused with the Cortex ISR priorities :-) What I can observe is if I use a much higher osDelay in my high priority task I can respond for the received USB message much faster. This is why I think tasks can mess up with my OTG interrupt.