Linux Ch340 Driver Info
| Metric | CH340 | FTDI FT232RL | |--------|-------|---------------| | Sustained throughput | 11.2 KB/s | 11.5 KB/s | | Max baud rate (stable) | 2 Mbps | 3 Mbps | | CPU usage @115200 | 0.8% | 0.7% | | Latency (worst-case) | 4 ms | 2 ms |
This feature explores the Linux CH340 driver: its architecture, performance characteristics, common pitfalls, and why it deserves more respect than it often gets. Early Linux users remember the CH340 with a shudder. For years, the default ch341.ko driver was a mess—plagued by dropped bytes, incorrect baud rate calculations, and complete failure at higher speeds. Many tutorials simply advised throwing away CH340 cables in favor of FTDI or Silicon Labs CP2102. linux ch340 driver
To see what baud rate the driver actually set: | Metric | CH340 | FTDI FT232RL |
: For standard baud rates up to 115200, the CH340 is indistinguishable from premium chips. At 921600 baud, the CH340 starts showing occasional frame errors (about 0.1%), while the FTDI remains solid. But at 2Mbps, the CH340 surprises—it actually works, though with ~1% error rate. 4. The Driver in Action: Troubleshooting Common Issues Even with a mature driver, things go wrong. Here’s the practical guide. Issue: Device shows up as ttyCH341USB0 instead of ttyUSB0 Cause : You have the legacy ch341.ko driver loaded alongside the new one. Fix : Blacklist the old driver: Many tutorials simply advised throwing away CH340 cables
: Transfer 10 MB of random data at 115200 baud, 8N1.
echo "blacklist ch341" | sudo tee /etc/modprobe.d/blacklist-ch341.conf sudo rmmod ch341 Fix : Add your user to the dialout group:
