in Device Manager. If it shows as a modem/com port, you are in the correct mode. 3. Flashing the Firmware (Qualcomm Flash Image Loader). Flat Build in the "Programmer Path" and select the prog_emmc_firehose_xxxx.mbn file from the extracted firmware folder. and select rawprogram0.xml , then select patch0.xml when prompted. button to start flashing.

Since specific firmware links change frequently, search for "Andromax M3y Unlock Firmware All Operator" on search engines for the latest working files.

Try a different USB port (use USB 2.0 instead of 3.0) or different USB cable. SIM Not Supported:

Wait until the log says "Download Success" and the device restarts. 4. Post-Flash Configuration After the device restarts, it may still not have signal. Connect to the M3y via Wi-Fi ( 192.168.1.1 in the browser) using the default password.

Unlocking the Andromax M3y to support other SIM cards (apart from Smartfren) requires flashing a custom firmware or using unlocking tools. Disclaimer:

Ensure the firmware you used is specifically designated as "Unlocked" or "All Operator."

Find the custom "Unlock Firmware" for Andromax M3y (usually in a file) from a trusted forum like XDA Developers or reliable Indonesian tech blogs. Download QFIL: Download the (QFIL) to flash the firmware. Extract the firmware files into a folder on your desktop. 2. Enter Download Mode (EDL Mode) Turn off the Andromax M3y. Remove the battery. Hold down the WPS button