Open the side compartment and remove the old label roll core. Insert the new roll, ensuring it slips the bar rather than going under it.
: Place a known calibration weight on the scale and enter calibration mode via the internal service switches to adjust readings for accuracy. Troubleshooting Inconsistent Readings : Ensure the scale is level and recalibrate if necessary. Label Errors : Check the gap sensor calibration if labels are not printing or feeding correctly. Digi Sm-90 User Manual
: Press specific key combinations (often the "Z mode" or "Mode" key) to switch between registration and programming modes. Programming PLUs Program Mode Use the keypad to enter the PLU (Price Look-Up) number. Input the item name, unit price, and weight settings. to save the entry. Changing Settings Open the side compartment and remove the old label roll core
: To connect via Ethernet, the scale's IP must be on the same submask as the PC (e.g., if the PC is 192.168.0.XXX , the scale should be configured between for the final digits). Programming and Operation Accessing Modes Troubleshooting Inconsistent Readings : Ensure the scale is
in Z mode and adjust the specific "SPEC" settings (e.g., SPEC 001 for price vs. weight). Maintenance and Calibration Calibration