Cisco Ccna 200-301 Practical Lab Guide With Packet Tracer Pdf < HD >

interface range f0/1-2 channel-group 1 mode active interface port-channel 1 switchport mode trunk Topology : PC-VLAN10 — SW1 (Trunk) — R1 (subinterfaces) — PC-VLAN20

access-list 1 deny host 192.168.1.10 access-list 1 permit any interface g0/0 ip access-group 1 out : interface range f0/1-2 channel-group 1 mode active interface

enable configure terminal hostname R1 enable secret cisco line console 0 password ccna login exit line vty 0 4 password ccna login exit service password-encryption banner motd #Unauthorized access prohibited# interface g0/0 ip address 192.168.1.1 255.255.255.0 no shutdown : show running-config | show ip interface brief Lab 2 – VLANs & Trunking Topology : PC-A (VLAN10) – SW1 (Trunk) – SW2 – PC-B (VLAN10) interface range f0/1-2 channel-group 1 mode active interface

ip route 192.168.23.0 255.255.255.0 10.1.1.2 : interface range f0/1-2 channel-group 1 mode active interface

ip nat inside source static 192.168.1.10 200.1.1.10 interface g0/0 (inside) ip nat inside interface s0/1/0 (outside) ip nat outside :